11 micro turbines with a high suction water / air piston pump
- from 2 to 3 ms with gusty winds.
suction capacity :approx 50 liters/hour from 8 to 9 meter depth or 25liters/hour from 20meters depth
suction + pressure capacity: approx 100 liters/hour from 8 meters depth to 10 meters high
This pump is design to work over very long period of time .unlike electric pump there is no internal heating and there is no need to let the system rest.once the pump is taking wind it will keep working.
11 turbines in line with a central connected worm gear box(1/20 ratio)in aluminium casing and oil tank connected to a 0.2 liter piston pump. body made in brass,piston in nylon,all other parts in stainless steel,supplied with different O rings sizes to control the wanted internal pressure.2 brass plated valves.1 gravity valve for the suction part and a pressure valve for the pressured exit.this pump generates approx 5 bars for high wind speed(50m high)and has a maximum pressure of approx 10 bars.there is 3 different setting for the pump course depending on volume or pressure wanted.pumps using wind energy have not so many regulations system possible so the final setting will depends on experiment by the user.this pump is ideal for many long lasting work,watering gardens/fields,filling up swimming pools/ponds,bringing up water from wells and pits,and many more applications to come.you can store the unused energy collected by filling up a reservoir on high altitude .Motorwind Pumps work also in stage level,that means that by having more than one pump at different altitude you can bring up water to basically any height.for example if you have enough wind energy to pump water to 30 meters high then by using 5 pumps in stage,you can pump water up to 150 meters.
Deep well pumping: a suction pump can lift up water from a depth of 10 meters maximum.this is due to the laws of physics when pressure = gravity .for deep water pumping we have an other additional set to be added on this pump.it works by combining suction and high pressure .water can be pumped up from 40 to 50 meters using just 2 regular hoses.
efficiency: an electric pump has an efficiency of approx 20%.that means that it takes 1 kWh of electricity to deliver approx 0.2 kWh of work done(720kJ).it takes approx the equivalent of 3 kWh in energetic value of oil or gas or coal used to produce this kWh,so we can say that the efficiency of an electric network to deliver a 0.2 kWh worth of work done is only : approx 7%.(93 % of the energy used as been wasted).Motorwind pump has an unbelievable efficiency of between 35% and nearly 50%(preliminary test shows)and does not release a mg of CO2.
Frame 2.60 meter long x 0.26 m height x 0.14 m wide .stainless steel main support
Volume : 0.35 CBM Measurement : 114 cm x 26 cm x 20 cm .Weight :17 Kgs
20'container = approx 75 pcs -----------40' container = approx 160 pcs